Fincor Drives

Manugraph DGM recently became aware of changes to the availability of several Fincor drive components. Over the years we have installed hundreds of Fincor Drive Systems and we feel it is important to keep our customers up to date with changes that can impact their existing Fincor Drive Systems. Currently there are several Fincor drives and drive components that have become obsolete and are no longer being manufactured.

We are continually working on new solutions to these problems, so that we can service and maintain your existing Fincor Drives in the future.

The following items below have recently become obsolete:


A geni encoder board.

Obsolete (no replacement): Geni Encoder Board
Note: Failure of the Geni Encoder Board will result in an inoperable drive system.
Solution: Replace with used board or complete drive replacement.
Used on the following series drive systems: 2010, 2030, 2040 series drives.
These drives are no longer available new.


 A solid state speed reference board.

Obsolete (no replacement): Solid State Speed Reference Board
Solution: Replace with used board or contact our Electrical Service Department for other possible solutions.
Used on the following series drive systems: 2090, SPC2000, SPC3000
These drives are no longer available new.


We will continually updated this list as we are made aware of any issues with parts and drives. We are doing our best to acquire used drives, to have a selection of used parts available for replacing obsoleted parts.

If you have any question please contact our Electrical Service Department at 1-800-346-6119 or (717) 362-3243.
Email – service@manugraphamericas.com

Comments are closed.